Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
EN
3. OPERATION
The comfort periods in the following week will commence before the programmed time
so that the room will begin warming up before you enter.
Note: The auto-programming period is continuous. The radiator updates according to
your life style variations, day by day, week by week.
2) SENSOR MODE :
The thermostat does NOT hold anything in memory.
3) MANUAL MODE :
In this mode, you decide when you want Comfort, Economy or Anti-frost.
When Manual mode is selected, you only have to choose Comfort, Anti-frost or Economy
and the desired room temperatures.
3.5 ADJUSTING THE TEMPERATURES
In order to change the Comfort and Economy temperatures the radiator must be in
MANUAL mode (see point 3.4).
The factory-set temperatures are:
Note: The anti-frost temperature (7 ºC) cannot be changed.
The operating temperature is shown in colours light 'temperature indicator':
Comfort and economy temperatures may be modified (the anti-frost temperature is fixed).
IRIS / ULTRAD
32
• If there is detection = Comfort mode.
• If there is no detection > 30 minutes
• COMFORT TEMPERATURE = 20 ºC
• ECONOMY TEMPERATURE = 16 ºC
• ANTI-FROST TEMPERATURE = 7 ºC
= Economy mode.
Temperature
indicator
- Red = Comfort
- Blue = Anti-frost
- Green = Economy
Publicité
Table des Matières
