Important - Haverland IRIS- 3 Manuel D'installation Et D'utilisation

3. OPERATION
6

IMPORTANT:

To affix the radiator
firmly to the
brackets: screw
down FULLY the 6
x 50 mm screws in
the upper part of
the brackets
3.1 INTRODUCTION
• YOU DO NOT HAVE TO PROGRAMME YOUR RADIATOR! Iris will programme itself
automatically.
• Its presence sensor and algorithms continually monitor your lifestyle habits and control your
electricity consumption at all times, especially for your comfort.
• Iris has four operating modes, 'learning', sensor, programming (via Smartbox - not included)
and manual.
• Open window detection function; if you leave a window open, the radiator will switch itself off
to prevent energy wastage.
Make sure that the radiator is fixed
firmly to the wall to avoid future
risk, before connecting the plug
into a nearby power supply socket.
After securely mounting the radiator
as described, insert the 13 Amp
moulded plug into a 13 Amp socket
outlet.
Alternatively, ask your electrician to
'hard wire' to a fused connection
spur on the main ring circuit.
IRIS / ULTRAD
EN
EN
27