Dynamic MX 91 Notice D'utilisation Et D'entretien page 16

Notice MX 91 INT./01 4/08/03 9:55 Page 16
All manuals and user guides at all-guides.com
⑨
ELECTRICAL DIAGRAM
MOTOR
ELECTRICAL REQUIREMENTS:
The mixer of a class 2 category (double insulation) is powered by a single phase alternating current and
do not require a "u" ground plug.
A differential circuit breaker and one (1) 10A fuse is required.
You must provide a 10/16A single phase current socket.
Always verify that your power supply corresponds to that indicated on the plate on the motor unit and
that it can take the amperage.
16