Crosscall X-SCAN Installation page 15

Les langues disponibles

When you open the «X-TRACK» app, you'll be taken by default to the «Trigger»

section. To access the other settings, press on the three lines located in the

upper-left corner of the screen.

1. TRIGGER

This section enables you to activate or deactivate the floating button and the

programmable physical button, and to define the readers (X-SCAN, terminal

camera) with which they'll interact. To do this, you'll need to:

• On the first line «Floating button configuration»: Select «None».

«Camera» or «Scanner». If you select «None», the floating button will

disappear. If the floating button is activated, you'll be able to freely move

it around your screen and change its size using the dimension cursor.

• On the second line «Push To Talk physical button configuration»: Select

«None». «Camera» or «Scanner».

2. DATA FORMAT

In this section, you can configure the prefixes and suffixes to be added to the

codes scanned, as well as the end character. For example, you can add a return

at the end of the line after each code scanned to create a list of codes that is

easy to exploit.

Just like when you add a suffix, it is imperative that you select the «Activate

suffix» option to be able to add an end character.

3. CAMERA AND SCANNER

In this section, you can configure code-reading by defining the 1D and 2D code

types that you want to scan. You can also define the minimum and maximum

number of characters that you want to decode. So, if you have configured the

scanner and camera on different buttons (floating and push to talk), you'll be

able to set up 2 different code-reading configurations.

In the scanner section, it is imperative that you click on the scanner icon in

the upper-right corner to send it the updated configuration. An «Updated»

Scanner confirmation message should appear.

4. PROFILE

In this section, you'll find an overview of your settings (Configuration details),

automatically saved whenever you change a setting in the app. You can share

your settings, so that other users can replicate your configuration. There are 2

solutions available for this:

Via the QR code

Generated a QR code via the «Generate QR code» option, which can be scanned

using the «Scan a QR code» option