Cleanfix RA 410 E Mode D'emploi page 11

5. Service
For repairs, please contact your specialist wholesaler
☞
or one of the service shops.
You will be expertly and quickly served.
☞
This machine is not approved for use on public paths
and roads.
6. Servicing instructions
The following instructions must always be
observed
When cleaning and servicing the machine, replacing
☞
parts or when changing over to a different function,
switch off the drive and remove the plug.
The power supply lead must not be damaged by
☞
driving over it, crushing, tugging etc.
Check the power supply lead regularly for signs of
☞
damage.
The machine must not be used if the power supply
☞
lead is not in perfect condition.
When using or replacing the power supply or
☞
equipment supply leads, use only those specified by
the manufacturer.
When replacing the plug-and-socket connectors of
☞
power supply or equipment supply leads, splash
protection and mechanical strength must be assured.
When transported in elevators, the applicable User
☞
instructions and safety regulations - note - in
particular capacity.
Only the spray and cleaning agents suitable for the
☞
machine's purpose may be used.
Never use highly flammable, combustible, toxic,
☞
health-hazardous, corrosive or irritant substances.
Repairs, including the fitting of spray agent lines and
☞
hoses, may only be carried out by approved customer
service shops or by specialists in this field who are
familiar with all the relevant safety regulations.
7. Storage
If the machine is not to be used it should be stored in a dry
room which is always above 0° C.
Look for in storage absolutely sure: Set machine to brush
pressure release lever (6). Rubber lips must not be flattened.
8. Environmental protection
The packaging material can be recycled.
Please do not throw the packaging
material into household waste; please
send it for recycling.
Old appliances contain valuable materi-
als that can be recy-cled; these should
be sent for recycling.. Batteries, oil, and
similar substances must not enter the
environment. Please dispose of your old
appliances using appropriate collection
systems.
RA 410 E - Englisch
All manuals and user guides at all-guides.com
Declaration of Conformity
We,
Cleanfix Reinigungssysteme AG
Stettenstrasse - CH-9247 Henau
declare under our sole responsibility that the product,
Autoscrubber
RA 410 E
from serial code No. 9001 and following
(name,type, serial number)
to which this declaration relates is in
conformity with the following stand- ard(s) or other
normative document(s).
Low voltage, machinery:
EN 60335-1 (ed.3); am1; am 2; EN 60335-2-72 (ed.2); am1
Emission:
EN 55014-1:00+A1:01+A2:02; CISPR 14-1:05 (ed.5)
Immunity:
EN 55014-2-97+A1:01; CISPR 14-2:97+A1:01(Cons. ed. 1.1)
EN 61000-6-2:05; IEC 61000-6-2:05 (ed.2)
EMF:
EN 50366:03+A1:06; IEC 62233:05:05 (ed.1)
Harmonics:
EN 61000-3-2:06; IEC 61000-3-2:05 (ed.3);
Voltage fluctuations:
EN 61000-3-3:95+A1:01+A2:05; IEC 61000-3-3:94
+A1:01+A2:05 (Cons. ed. 1.2)
( title and/or number and date of issue of the standard(s) )
following the provisions of Directive
2006 / 95 / EC - 2006 / 42 / EC - 2004 / 108 / EC
Henau, 01.01.2010
Roland Flück
Director of Development
Authorised Regulatory Manager
Cleanfix Reinigungssysteme AG
Roland Flück
Stettenstrasse
CH-9247 Henau SG
Tel. + 41 71 955 47 47
Fax + 41 71 955 47 60
www.cleanfix.com
info@cleanfix.com
10