Publicité
Les langues disponibles
Les langues disponibles
All manuals and user guides at all-guides.com
Problem
a Camera shake
The subject
appears out
of focus in
the print.
a Something in front or in back of the
subject is in focus.
a " " blinks on the LCD panel.
The numeral
" " does not
appear even
when film is
loaded.
a The battery for date is exhausted.
The date/
time are not
aThe date panel displays "
imprinted on
pictures.
A characteristic of electronic cameras
In rare cases, when strong static electricity or the like is
applied to the camera, the camera may not work properly.
If this happens, remove the battery and reinstall it.
Check points and solution
Gently press the Shutter Release button,
or use a tripod or place the camera on a
stable flat surface.
Be sure to center the autofocus frame
mark on the subject before releasing the
shutter. When correct focus cannot be
easily achieved, use the focus lock.
Remove the film and load it again.
Replace it with a new one.
Set the panel so that it displays the
indication to be imprinted.
Additional Information
Ref. page
12,19,
21, 23,
27
14,16,
17
9,10
30,31
"
28
33
Publicité
