All manuals and user guides at all-guides.com
2.
Compose the picture, then lightly press
the Shutter Release button.
3.
Check that the green LED lights up,
then shoot.
Both camera and subject be still
The Red-eye Reduction lamp lights up for approx. a second
before the flash fires. Be careful not to move the camera or
let the subject move until the flash fires.
While the green LED is blinking with the Shutter Release
button pressed lightly, the flash is being charged, and the
shutter cannot be released. Lightly press the Shutter Release
button again, and release the shutter after the green LED
stops blinking and stays lit.
Red-eye Reduction mode is not automatically canceled by
turning the power off. To cancel the Red-eye Reduction
mode, press the
LCD panel.
button until "
" disappears from the
Advanced Operations
25