Teac SR-L100 Manuel Du Propriétaire page 9

< Discs should be returned to their cases after use to avoid dust and
scratches that could cause the laser pickup to "skip."
< Do not expose discs to direct sunlight or high humidity and temperature
for extended periods. Long exposure to high temperatures will warp the
disc.
< Do not play any disc that is warped, deformed or damaged.
Playing such discs may cause irreparable harm to the playing mechanisms.
< CD-R and CD-RW discs are more sensitive to the effects of heat and
ultraviolet rays than ordinary CDs. It is important that they are not stored
in a location where direct sunlight will fall on them, and away from
sources of heat such as radiators or heat-generating electrical devices.
< Printable CD-R and CD-RW discs aren't recommended, as the label side
might be sticky and damage the unit.
< Do not stick papers or protective sheets on the discs and do not use any
protective coating spray.
< Use a soft oil-based felt-tipped pen to write the information on the label
side. Never use a ball-point or hard-tipped pen, as this may cause damage
to the recorded side.
< Never use a stabilizer. Using commercially available CD stabilizers with
this unit will damage the mechanisms and cause them to malfunction.
< Do not use CDs with an irregular shape (octagonal, heart shaped,
business card size, etc.). CDs of this sort can damage the unit:
< If you are in any doubt as to the care and handling of a CD-R/CD-RW
disc, read the precautions supplied with the disc, or contact the disc
manufacturer directly.
9