Teac SR-L100 Manuel Du Propriétaire page 24

To check the programmed
order
In the stop mode, press the PROGRAM
button repeatedly. The track number and
program number will be shown on the
display.
To add a track to the end of
the program
In the stop mode, press the PROGRAM
button repeatedly until "00" appears on
the display. Select a track number using
the Skip button (.or/) and then
press the PROGRAM button. The track is
added to the end of the program.
To overwrite the program
In the stop mode, press the PROGRAM
button repeatedly until the program
number to be changed appears on the
display.
Select a new track number using the Skip
button (.or/) and then press the
PROGRAM button.
24
Programmed Playback 2
To clear program
To clear the programmed contents, press
the PROGRAM and the STOP button (H)
in the stop mode.
< If the disc cover is opened or the
STANDBY/ON button is pressed, the
programmed contents will also be
cleared.
< If the unit is disconnected from the
power supply, the programmed contents
will be cleared.