Publicité
Les langues disponibles
Les langues disponibles
4
If you select CD or TUNER in step
turn the Skip rotary knob (. or
/) to set the volume, and then
press the ALARM button.
Setting the timer is now completed and
the timer is turned on.
The ALARM button lights up.
5
Prepare the source.
When the source is set to "CD", set a
CD.
When the source is set to "TUNER", tune
in a station.
6
Press the STANDBY/ON switch to
turn the unit off (standby).
Don't forget to turn the unit off
(standby), or the timer won't work.
3
,
< Playback volume will gradually increase
till your set volume when the unit is
turned on by timer.
< If the source is set to "CD" but no disc is
set, the unit will turn on with a "BUZZ"
alarm.
< When the source is set to TUNER, The
unit will turn on with the station you
selected last time.
< If the unit is disconnected from the
power supply for more than 30 minutes,
clock and timer settings will be erased.
In case ALARM 2 overlaps ALARM 1:
Example:
ALARM 1 (Start time: 7:00, Source: CD)
ALARM 2 (Start time: 7:30, Source: TUNER)
The unit turns on at 7:00 with CD, and
turns off at 8:00.
ALARM 2 doesn't work at all.
Note that if the unit is in the snooze mode
at the start time of ALARM 2, ALARM 2
will work; the source will switch to TUNER
at 7:30 and the unit will turn off at 8:30.
31
Publicité
