Télécharger Imprimer la page

Teac SR-L100 Manuel Du Propriétaire page 13

Publicité

Les langues disponibles

Les langues disponibles

A
VOLUME
Turn the rotary knob (or press the
VOLUME buttons of the remote control
unit) to adjust the volume level.
B
STANDBY/ON
Use this button to turn the unit on or
standby.
The equipment draws a nominal
amount of power from the AC outlet
even with its STANDBY/ON switch in the
STANDBY position.
C
CD
Use this button to select CD mode.
D
TUNER (FM/AM)
Use this button to select TUNER mode.
In TUNER mode, press this button to
select FM or AM.
E
AUX
When a component is connected to the
AUX IN jack, use this button to listen to
the external source.
F
TALK MODE
In TUNER mode, use this button to turn
on or off the Talk mode.
G
SNOOZE/SLEEP
Use this button to set sleep timer.
When the unit is turned on by the timer,
press this button to turn the unit standby
for 10 minutes.
H
Open/Close
Press this mark to open and close the
disc cover.
I
Stop (H)
In CD mode, use this button to stop
playback.
J
Play/Pause (y/J)
In CD mode, use this button to start or
pause playback.
K
ALARM 1/2
Use these buttons to set timers.
L
ALARM CHECK
Use this button to check the timer
setting.
M
Skip (.//)/TUNING/
CLOCK ADJUST
In CD mode, turn this rotary knob to skip
tracks.
In TUNER mode, turn this rotary knob to
tune in a station.
This rotary knob is also used to adjust
time, change timer settings, etc.
N
Slot for the remote control unit
Keep the remote control unit in this slot
when not in use.
O
TIME ADJUST
Open the disc cover and hold down the
TIME ADJUST button for more than 3
seconds to enter the clock setting mode.
Then adjust the clock using the Skip
rotary knob.
13

Publicité

loading