Teac SR-L100 Manuel Du Propriétaire page 17

2
4
1
Press the OPEN/CLOSE mark (L) to
open the disc cover.
2 Press and hold the TIME ADJUST
button for more than 3 seconds and
release it when the time display
starts blinking.
< If you leave the unit idle for 60 seconds,
the time setting mode will be cancelled.
Setting the Clock
1
5 3
3 Turn the Skip rotary knob (. or
/) to adjust the clock.
4 Press the TIME ADJUST button.
The clock starts from 00 second.
5 Gently close the disc cover by hand.
When closing, press the OPEN/CLOSE
mark (L).
< If the unit is disconnected from the
power supply for about 30 minutes, the
clock setting will be reset.
DST (Daylight Saving Time)
Select ON to put the clock one hour
ahead. Select OFF to turn the DST off.
17