Teac SR-L100 Manuel Du Propriétaire page 33

Snooze
After the timer has turned on the unit,
press the SNOOZE button.
The SNOOZE indicator will light in the
display and the unit enters STANDBY
mode.
After 10 minutes, the unit will turn on
again.
You can use this function repeatedly for
up to 60 minutes.
< Press the STANDBY/ON button or the
active ALARM button (1 or 2) once to
stop this function.
Note that if you press the ALARM button
twice, the timer is also turned off.
Sleep Timer
The power can be switched off after a
specified amount of time.
Press the SLEEP button repeatedly until
desired time appears on the display.
SLEEP 90, 60 or 30:
The power will be switched off 90, 60 or
30 minutes later.
Normal display:
The sleep timer is off.
< When you set the sleep timer, the display
is dimmed automatically.
< If you want to check the remaining time,
press the SLEEP button once. The
remaining time will be displayed for 3
seconds, and then return to the normal
display.
33