Publicité
Only in operation with the 6021 Control-Unit :
G
The acceleration / braking delay that has been set
can be minimized by pressing a function button.
The maintenance work required with normal
operation is described below. Please see your
authorized Märklin dealer for repairs or spare parts.
It is not necessary to open the locomotive for main-
tenance work. Only the tender deck has to be remo-
ved to set the decoder parameters.
In principle the pulling power for this model is limited.
No warranty or damage claims shall be accepted in
those cases where parts neither manufactured nor
approved by Märklin have been installed in Märklin
products or where Märklin products have been
converted in such a way that the non-Märklin parts
or the conversion were causal to the defects and / or
damage arising. The burden of presenting evidence
and the burden of proof thereof, that the installation
of non-Märklin parts or the conversion in or of Märklin
products was not causal to the defects and / or
6
All manuals and user guides at all-guides.com
damage arising, is borne by the person and / or
company responsible for the installation and / or
conversion, or by the customer.
Safety Warnings
G
G
G
This locomotive is to be used only with an operating
system designed for it (Märklin 6646/6647
AC transformer, Märklin Delta or Märklin Digital).
This locomotive must never be supplied with
power from more than one transformer.
Pay close attention to the safety warnings in the
instructions for your operating system.
Publicité
