Publicité
PUSHING THE CHAIR - FREEWHEEL MODE
The power chair supplied is fitted with the lever dis-engage type motors. To dis-engage the drive to allow
the chair to be pushed the following instructions should be followed carefully.
To dis-engage the drive, operate the levers to the position A shown in the diagram.
LEVERS POINTING OUTWARDS.
To
re-engage
the
LEVERS POINTING REARWARDS.
Push the chair slightly forwards to ensure that both motors are fully locked in the drive position.
CAUTION
CAUTION
When the drive is dis-engaged there are no brakes, unless the wheel-locks are applied.
When the drive is dis-engaged there are no brakes, unless the wheel-locks are applied.
Before entering or leaving the chair always re-engage the drive on both sides. On no
Before entering or leaving the chair always re-engage the drive on both sides. On no
!
account dis-engage the drive when the chair is occupied, unless being pushed by an
account dis-engage the drive when the chair is occupied, unless being pushed by an
attendant.
attendant.
All manuals and user guides at all-guides.com
drive,
operate
the
WARNING - Emergency freewheel device.
WARNING - Emergency freewheel device.
Always re-engage the emergency freewheel
Always re-engage the emergency freewheel
!
device after use. Failure to do so may result
device after use. Failure to do so may result
in injury. !
in injury.
levers
to
position
20
B
shown
in
the
diagram.
Publicité
