WIFI function
First of all, you should download Simply-Fy and install to your portable device. Then enroll your induction
hob.
Refer to annex for details.
To use the WIFI function, switch the hob on and press the WIFI key. The wifi LED flash
fast for 5 seconds which means the WIFI module is booting. If the WIFI module connects
the router, the wifi LED will remain on all the time. Otherwise, the WIFI LED will be
flashing in cycles of 1 second on 1second off. If connect correctly, you can find many hob
information from Simply-Fy, e.g. Zone power, remaining heat time.
oost mode
Touching the heating zone selection control , then touching "+" 。Make sure the display shows "9".
Touching the "+" button again ,the zone indicator show "b" and the power reach Max
Cancel the Boost mode
Touching the "-" button to cancel the Boost function, then the cooking zone will revert to its original setting.
Touching "-" and "+" control together. the cooking zone switch off and the boost function cancel automatically
• The cooking zone returns to its original setting after 5 minutes
Note: It is recommended that the cooker hood suction is switched on few minutes prior to
cooking and switched off few minutes after terminating cooking.
Pause Mode
•
You can pause the heating instead of shutting the hob off.
•
When entering the Pause mode, all the controls except the ON/OFF control are disabled.
Touch the lock/pause control.
When the hob is in the pause mode, all the controls are disable except the ON/OFF
the induction hob off with the ON/OFF
To enter pause mode
All the indicator will show " 11"
To unlock the controls
Touch the lock/pause control.
control in an emergency.
10
,
you can always turn