Table des Matières
Publicité
Introduction: This User Manual contains important safety information regarding the use of
this multi-purpose/combination ladder, which is suitable for use as a stepladder and leaning
ladder. Please read this manual carefully before using the ladder and keep it safe for future re-
ference. Always include this user and operating guide when handing the ladder over to a new owner.
1. Intended use: This ladder is a mobile piece of equipment that can be used in different locations.
It is designed for performing small-scale jobs at heights that would make the use of other types of
equipment inappropriate (see the German Ordinance on Industrial Safety and Health). This ladder
must only be used as described in this User Manual. All other uses are regarded as inappropriate use.
We do not accept any liability for damage arising from the inappropriate use of the ladder. Any chan-
ges made to the ladder without the manufacturer's authorisation will void the warranty.
2. Technical information: Illustration of the multi-purpose ladder in different configurations and list
of components. The technical information specific to this ladder is affixed to the ladder itself. Please
refer to the table for more information.
3. Scope of delivery: List of all of the components that are supplied with the ladder (example): Ladder
components (all) + User Manual + Stabiliser + Trigon stabiliser (where required) + Nuts & Bolts
4. Assembly instructions: Depending on the ladder type and delivery condition, the ladder may yet
have to be fully assembled before use. Description/illustration of the assembly work required before
the ladder can be used. Example: Fitting the diagonal and Trigon stabiliser.
5. General safety information: The packaging can pose a suffocation hazard. Ladders and packa-
ging materials are not toys. Use of this ladder is always associated with a risk of falling off the ladder
and of the ladder tipping over. This can result in injury to persons and damage to objects. All of the
work performed with and on the ladder must be performed in such a way as to minimise these risks
as much as possible. This ladder is only designed for light work and short periods of use. Do not work
on the ladder for too long without taking regular breaks. Fatigue is a hazard and can impact on the
safe use of the ladder. The ladder must be suitable for its relevant use and must only be used in the
specified position. Only ever use the treads provided. The ladder and ladder components must not be
modified. Always make sure to have a safe handhold and foothold when working on and climbing the
ladder. Always observe the national rules and regulations, in particular if using this ladder for profes-
sional work. Only use manufacturer-approved accessories.
6. Assembly/Use: The 3-section multi-purpose ladders consist of a double-sided 2-section steplad-
der and a leaning ladder. The stepladder can be turned into a leaning ladder (extension ladder). If it
has the necessary technical features, the leaning ladder can be used as a stand alone ladder or as an
extension on the stepladder. The 2-section multi-purpose ladders consist of a double-sided 2-section
stepladder. The stepladder can be turned into a leaning ladder (extension ladder).
Configurations (schematic diagrams): Free standing stepladder with attached leaning ladder
(3-section ladder). Free standing stepladder (2-section ladder). Leaning / extension ladder (3-section
ladder). Leaning / extension ladder (2-section ladder). Leaning ladder (1-section) (if designed for this
purpose) Free standing stepladder set up on stairs (2-section ladder).
6.1 General safety information
1.
Caution! Risk of falling off the ladder.
Read the entire User Manual For more information on this ladder, please visit our
2.
website.
Check the ladder for damage after delivery and every time before use. Do not use
3.
ladders that are damaged.
4.
Maximum load
GB
Publicité
Table des Matières
