Nuna Tavo Mode D'emploi page 15

2 Assemble rear wheels to brake assembly. A click sound means they are
(6)
locked.
Check that wheels are securely attached by pulling on wheel assemblies.
3 Wrap the rear leg connecting tube with the fabric flap from the storage
basket and connect the three snaps.
4 To disassemble rear wheel, detach rear wheel from rear wheel mount
(8)-2
while pressing the release button
Assemble Armbar
1 Align the armbar ends with the armbar mounts, and then slide down to lock.
Check that armbar is securely attached by pulling on each end.
2 To disassemble armbar, press armbar release buttons
pull out the armbar.
3 The completely assembled stroller is shown as
How to Use the Nuna TAVO
Securing child
1 To release the buckle latch, push on center button and remove the clips.
2 To secure child, assemble buckle and latch.
3 Fit harness snugly to child by sliding each adjustment buckle.
Adjusting the shoulder harness position
1 To adjust the position of the shoulder harness anchor, open the zipper of
seat back, turn the anchor to align with slot. Thread it through the shoulder
harness slot from back to front
closest to child's shoulder height
All manuals and user guides at all-guides.com
(7)
(10)-2
(17)
. Rethread it through the slot that is
(18)
(8)-1
.
(10)-1
.
(11)
(13, 14, 15)
(9)
, and then
(12)
(16)
14