Kettler MARATHON TX 5 Instructions De Montage page 4

GB Assembly Instructions
All KETTLER products are designed in accordance with the latest safety regulations and undergo a constant process of quality control during manu-
facturing. The knowledge gained in this process is used to constantly improve and develop our products. In order to offer our customers the very
best in product quality, we reserve the right to make technical changes at any time. In spite of this, should you have any cause for complaint, plea-
se contact your KETTLER dealer.
For Your Safety
■ The running belt should be used only for its intended purpose,
i.e. for physical exercise (walking and jogging) by one (1) adult
persons.
■ The running belt is not suitable for commercial use
■ Any other use of the equipment is prohibited and may be dan-
gerous. The manufacturer cannot be held liable for damage or
injury caused by improper use of the equipment.
■ Damaged components may endanger your safety or reduce the
lifetime of the equipment. For this reason, worn or damaged
parts should be replaced immediately and the equipment taken
out of use until this has been done. Use only original KETTLER
spare parts.
■ The running belt has been designed in accordance with the
latest standards of safety. Incorrect repairs and structural modi-
fications (e.g. removal or replacement of original parts) may
endanger the safety of the user.
■ The running belt must be set up on firm even ground. Ensure
that the power cable is not pinched and that no-one can trip
over it.
■ Always ensure that the space under the running belt is kept free,
i.e. that there are no objects, pets etc. beneath it.
■ Never touch the moving belt with your hands. Also ensure that
there are no objects close to the belt or the rollers which could
be pulled into it thus causing injury or damaging the unit itself.
■ The running belt is not suitable for use by persons weighing
over 150 kg.
■ The unit should be positioned in such a way that there is a space
of 100 cm on both sides and 200 cm behind it.
■ The treadmill is a training device driven by a motor and requi-
res special safety instructions and technical knowledge when
being used. Persons with limited physical, sensory or mental
skills and children have to be instructed upon the correct use of
the device and must never use the device without supervision.
■ The continuous sound level of the device is 72 dB at maximum
speed.
■ The unit requires a power supply of 230 V / 50 Hz. It should be
connected only to grounded safety socket with a single 16-A
fuse. Do not under any circumstances carry out electrical repairs
or alterations yourself. Always ensure that such work is done by
a properly qualified electrician.
■ Do not use a multiple power socket for the running belt. If an
extension cable is being used, ensure that it complies with the
Handling the equipment
■ Standards:
The machine complies with the DIN EN 957 - 1/6, class HB. It
is therefore unsuitable for therapeutic use.
■ Before using the equipment for exercise, check carefully to ensu-
re that it has been correctly assembled and checked.
■ Usage of the equipment in damp rooms is not permitted.
Please ensure that no part of the machine comes in contact
with liquids (drinks, perspiration etc.). This may cause corrosi-
on.
■ The running belt is designed for use by adults and children
should not be allowed to play with it. Children at play behave
unpredictably and dangerous situations may occur for which
the manufacturer cannot be held liable. If, in spite of this,
4
All manuals and user guides at all-guides.com
■ When the unit is not in use, unplug it from the power supply.
■ To ensure that the safety level is kept to the highest possible stan-
■ Before carrying out cleaning or maintenance work, always dis-
■ Please ensure that liquids or perspiration never enter the machi-
■ Repairs on the electrical components in the unit should be car-
■ Always observe the general safety rules and precautions for
■ All electric appliances emit electromagnetic radiation when in
■ Prior to training attach the cord of the running belt stop trip to
■ The KETTLER treadmill has an emergency stop mechanism for
■ An unmonitored use of the treadmill by other people can be
■ In case of an emergency, hold on tightly to the handrail with
■ Any interference with parts of the product that are
■ Should you be in any doubt, please consult your dealer
■ Always wear suitable shoes (running shoes) when using the
■ Before beginning your first training session, familiarize yours-
■ If the equipment is in regular use, check all its components
■ In case of a regular use of the running belt, the cold running
local safety regulations of electrical equipment..
dard, determined by its construction, this product should be ser-
viced regulary (once a year) by specialist retailers.
connect the running belt from the power supply (i.e. pull the
plug out of the socket).
ne or the electronics.
ried out by qualified persons only.
working with electrical equipment.
operation. Please do not leave especially radiation-intensive
appliances (e.g. mobile telephones) directly next to the cockpit
or the electronic controlsystem as otherwise values displayed
might be distorted (e.g. pulse measurement).
your clothing.
your safety. Before starting your workout, fasten the cord of the
safety key to your clothing. If the treadmill has been shut down
by removing the safety key, restart it by reinserting the key. An
automatic restart of the treadmill belt does not occur. Further
instructions concerning the handling of the safety cut-out can be
found in the operating instructions for the training computer.
prevented by removing the safety key and keeping it safely hid-
den.
both hands and leave the treadmill by means of the antislipping
surface of the lateral platform. Activate the emergency stop
mechanism (safety cut-out).
not described within the manual may cause damage, or
endanger the person using this machine. Extensive
repairs must only be carried out by KETTLER service staff
or qualified personnel trained by KETTLER.
children are allowed to use the equipment, ensure that they
are instructed in its proper use and are supervised accor-
dingly.
running belt.
elf thoroughly with all the functions and settings of the unit.
thoroughly at appropriate intervals. Pay particular attention to
the tightness of bolts and nuts.
belt has to be serviced with silicone oil.
)
.