Güde UNI MIG 125 SYN Traduction Du Mode D'emploi D'origine page 36

ENGLISH
Symbols
30
Wear personal protective equipment.
Welding mask to be used!
Special welding gloves to be worn at all
times.
Wear saety cut through resistant shoes
with saety sole and steel toe !
Protective apron to be used
Beore carrying out any work on the
machine, disconnect the plug rom the
socket.
Pressure bottle to be secured by chain
Caution  hot surace!
Protect against humidity Never expose
tool to rain.
Prohibition or persons with a pacemaker!
Keep distance o persons Observe to keep
out o dangerous zone
~ Singlephase transormer with rectier
1
MIG (welding, metalinertgas)
MAG (welding, metalactivegas)
Caution!
Read the Operating Instruc
tions!
Warning against dangerous
voltage
Risk o explosion
Warning against toxic
umes!Not to be used in enc
losed spaces
WIG (tungsten inert gas welding)
MMA (electrode welding)
Suitable or welding with an increased
electric risk.
Singlephase alternating current with
rated requency o 50 Hz
Any damaged or disposed electric or
electronic devices must be delivered to
appropriate collection centres.
Protect against humidity
This side up
Requirements for operating sta
The operating sta must careully read the Opera
ting Instructions beore using the appliance.
Qualication: Apart rom the detailed instructions
by a proessional, no special qualication is necessary
or appliance using.
Minimum age: Persons over 16 years o age can
only work on the appliance. An exception includes
youngsters trained in order to reach knowledge
under supervision o the trainer during occupational
education.
Training: Using the appliance only requires corre
sponding training by a proessional or the Operating
Instructions. No special training is necessary.
Emergency procedure
Conduct a rstaid procedure adequate to the injury
and summon qualied medical attendance as quickly
as possible. Protect the injured person rom urther
harm and calm them down. For the sake o eventual
accident, in accordance with DIN 13164, a workplace
has to be tted with a rstaid kit. It is essential to
replace any used material in the rstaid kit immedia
tely ater it has been used.
I you seek help, state the ollowing pieces o inor
mation:
1. Accident site
2. Accident type
3. Number o injured persons
4. Injury type(s)