Becker 4935 200 032 0 Bulletin Technique page 10

Technical Information
I
0
I
0
I
0
clack
I
0
I
0
I
0
I
0
I
0
I
0
10
Action
3c) Antilifting device in the lower end limit position to upper posi-
tion without end stop (for roller shutters only!)
Adjust the mains switch from 0 to I.
Adjust to lower end limit position.
Then adjust to desired upper end
limit.
Now press the programming button
„Programme/delete end limits".
Adjust the mains switch from I to 0. The end limits are now set.
3d) Antilifting device in the lower end limit position to upper end
stop (for roller shutters only!)
Adjust the mains switch from 0 to I.
Adjust curtain into lower end limit
position.
Now adjust to the desired upper
end limit.
Adjust the mains switch from I to 0. The end limits are now set.
DE GB
Becker-Antriebe GmbH
35764 Sinn/Germany
Response
The tubular drive will be automati-
cally turned off.
The tubular drive will make a „clack"
sound to confi rm.
The tubular drive will be automati-
cally turned off.
The tubular drive will be automati-
cally turned off.
FR NL