Becker U30 Notice De Montage Et D'utilisation page 55

Week function
The week function enables you to program a particular up and
down time for each individual day of the week.
In order to activate the week function, all DIP switches in the rear
of the housing must be set according to the table on page 63.
The following times were preset for this operation mode by the
manufacturer:
· Up time Monday through Friday
· Down time Monday through Friday – 2ß0:0ß0
· Saturday / Sunday – no preset time.
If you wish different up or down
times, perform the following
steps:
Press the day button. The display
will show a new day of the week
after every press.
Perform the steps described on page 52 to 53 to program the
up and down times for the currently displayed day.
– 0ß6:0ß0
(QS8:0ß0)
(0w8:0ß0)
de
en
fr
nl
... etc.
55