Becker U30 Notice De Montage Et D'utilisation page 47

Automatic mode
Push the selector switch to (A), all the way to the left until you hear
the "click" in order to activate the automatic mode.
The automatic mode is now activated and the roller shutter will
move up and down at the programmed times. Regardless of the
programmed times, it is still possible to move the roller shutter up
and down by pressing the up or down button and the programm-
ing remains unaffected.
If you press the up or down button longer than 2 seconds, the
roller shutter moves up or down.
Simply press the opposite button to stop the motion, i.e.:
· press the down button, if the roller shutter is moving up,
· press the up button, if the roller shutter is moving down.
The roller shutter will only move up or down again after the up or
down button has been pressed.
By simply pushing the selector switch to manual mode (H), the
automatic mode can be interrupted for an extended period of time.
After selecting the automatic mode again, the roller shutter control
U30 will execute the last pending command from the automatic
mode. The last pending command will also be executed when
resetting after power failure.
de
en
fr
nl
47