Becker U30 Notice De Montage Et D'utilisation page 42

Assembly and Operating Instructions
Safety precautions
· Check the control for any signs of damage immediately after
unpacking. Do not start up the control in case there is any
damage. If there is damage due to the shipping, please notify the
supplier immediately.
· Please note that the roller shutter control U30 re quires an ope-
rating voltage of 230 VW, 50 Hz. Make sure to contact a profes-
sional electrician for the installation and setting of the DIP
switches on the rear panel of the device.
· The control was designed for correct use as described in the
operating instructions. Any changes or modifications thereof
are not permissible and will result in loss of all warranty claims.
· If safe operation of control or roller shutter can not be guaran-
teed, the control must be turned off immediately and protected
against unintentional operation. The same applies for work on
windows or roller shutters that are operated by this control.
42