Publicité
Les langues disponibles
Les langues disponibles
Rear wheel
•
Loosen the screws ①: two on each side of the wheel.
•
Remove the cover ②, then disconnect the motor cable.
•
Unscrew the nuts of the motor ③: one on each side of the wheel.
•
Remove the rear wheel from the scooter.
Front wheel
•
Unscrew the nuts of the front wheel ④: one on each side of the wheel.
•
Remove the front wheel from the scooter.
•
To replace the wheel or tube, it is recommended that you contact a
qualified technician at your retailer.
Lubrication recommendations
Lubricating components is necessary for the proper functioning and life of your
scooter and to prevent corrosion of components.
Use special transmission oil for brake cables. After washing: dry and then oil the
mechanically moving components (brake lever and caliper axles, cable, folding
parts). To ensure a watertightness, grease the stem and headset sufficiently.
81/192
Publicité
