Publicité
Les langues disponibles
Les langues disponibles
•
Maintenance of screws and bolts:
Check the screws of each part carefully before using the scooter. The
screws must not be loose or too damaged.
Note: Check that the scooter is functioning normally before each use. If there is
a problem, do not use it and contact the after-sales service to have it repaired.
Never modify the structure of the scooter. Any modification may result in a risk
of injury, and the manufacturer will not be liable for any damage resulting from
such modification.
Disc brake adjustment
The pads exert pressure on a disc attached to the wheel hub. The intensity of
the pressure is controlled by a brake lever, depending on the force applied by
the user. Do not operate the brake lever when the wheel is detached from the
frame or the fork.
To adjust the braking force slightly, turn the micro-adjustment screw.
To align the mechanical disc brake caliper, loosen the fixing screws of the
brake caliper support.
Brake with the corresponding brake lever (the brake caliper is positioned
correctly) and hold the brake lever in this position while re-tightening the caliper
bracket fixing screws.
78/192
Publicité
