Wayscral KS300 Notice D'utilisation page 64

IV. Speed controller
In order to activate the speed controller:
•
Hold the acceleration lever in the same position for 6 seconds.
•
The speedometer icon lights up to indicate that the speed controller is
active.
To deactivate the speed controller:
•
Use the brake lever or
•
Press the acceleration lever
V. Speed alarm
•
Your scooter has a built-in speed alarm that warns you when your speed
is too high, especially when going downhill. This is triggered when the
scooter's speed exceeds 30 km/h.
•
Pay particular attention to the alarms, as riding at this or higher speeds
can cause you to lose control of your scooter and injure yourself.
64/192