Led Indicators On The Pump Case - arjo Flowtron ACS900 Notice D'utilisation

Audible Alarm Muted
Warning and Alarm
Indications
LED Indicators on the
Pump Case
LED Colours
Extinguished
Green
Yellow
When the pump is in Standby, this icon indicates that
the alarm volume can be changed (refer to "To
Change the Audible Alarm Volume Setting" on
page 18).
This icon indicates that the audible alarm has been
muted.
The following five icons indicate that a fault has been
detected in the system. Refer to "Troubleshooting"
on page 22) for a list of fault conditions, the
corresponding warning and alarm indications, and
possible corrective actions to rectify the faults.
There are additional LED indicators on the pump to
show pump status and alarms:
• Two sets on the front of the pump.
• One set on the underside of the pump.
Their status is as follows:
Pump Status
Off or Standby
• No fault detected.
Run
• Warning only detected.
Run Fault detected with full audible and visual alarm.
Alarm detected which may cause an
interruption in therapy.
Low pressure or garment leak.
Kinked or blocked tubeset.
High temperature.
Hardware fault detected or periodic service
required.
Warnings/Alarms
- -
10