Ferroli ELDA Instructions Pour L'installation Et L'entretien page 205

ELDA - CORONA
8.3 CLEANING OPERATIONS
8.3.1. BRAZIER - BRAZIER HOLDER CLEANING
To clean the brazier, proceed as described:
Step Action
1 Remove the brazier and the flame baffle.
Remove the ash residues deposited in the combustion chamber and in the brazier holder.
2
Note: It is advisable to use a suitable vacuum cleaner.
Clean daily to ensure perfect combustion conditions, as the brazier holes allow
the passage of combustion air.
Also check that the combustion air passage and the internal baffle (if present) of the brazier holder are free from
combustion residues and any ash.
The brazier must rest on the brazier holder and precisely on the entire annular
band without having any air passage openings.
8.3.2. CLEANING THE ASH PAN
To clean the ash pan, proceed as described:
Step Action
1 Open the fire door.
2 With a suitable vacuum cleaner, vacuum the ash inside and any combustion residues.
3 After cleaning, the fire door must be closed.
The ash pan can be cleaned every 2-3 days depending on unit use.
EN
A73023860 - Rev 01 - 06/2023 205