Publicité
Les langues disponibles
Les langues disponibles
ELDA - CORONA
6.
CONTROLS
6.1
DESCRIPTION OF CONTROLS
The control panel allows the unit to be turned on and off, adjustments during operation and setting of management
and maintenance programs.
The display shows information about the unit's operation status.
IR REMOTE CONTROL
(Available on request)
A
B
E
A-B
Buttons for setting the room temperature
C-D
Buttons for setting the output level
E
On/Off button
1
- : P1 Decrease button, to set the room temperature and to scroll the various menus
2
+: P2 Increase button, to set the output and to scroll the various menus
3
ON/OFF: P3 On/Off button, confirm and exit the MENU
4
DISPLAY LED: Indicates stove work status and setting menu.
5
TIMER LED: On when programmer timer setting is enabled.
TEMP OK LED: If on, it indicates room fan on for temperature reached. The stove continues heating in
6
ECO mode.
7
IGN. LED: If on, the pellet igniter is powered.
8
AUGER LED: If on, it indicates that the auger is working.
ON LED: If on, it indicates stove is in ignition or heating mode. If flashing it indicates stove is in the cooling
9
phase or error.
10
AL : If on or flashing, it indicates intervention of the pressure switch or safety thermostat.
11
IR receiver
EN
A
C
B
D
C
E
D
A73023860 - Rev 01 - 06/2023
CONTROL PANEL with 3 BUTTONS
11
10
5
11
1
2
6
1
2
8
9
10
5
4
7
3
6
4
193
8
7
Publicité
