Diono radian 3RXT Mode D'emploi page 23

11. To remove UAS strap from
vehicle, use UAS release on the
UAS connectors and pull them
off the anchor bars.
12 11
12. To loosen or remove the top
tether, push in on the grey
button to loosen, then unclip
the top tether.
12
44
1-866-954-9786
INSTALL USING 5-POINT HARNESS WITH
LAP/SHOULDER BELT: 10–29.5 kg (22–65 lb)
1. Unhook and remove top
tether from storage location
on back of seat.
2. Place car seat forward-facing
in back seat of the vehicle. The
entire seat bottom should sit as
flat as possible on the vehicle
seat.
3. Loosely attach top tether
strap. Do not tighten. Consult
vehicle's owner manual for
specific location.
diono.com
2
2
1
2
3
45