Kozy Heat Fireplaces Komfort Zone KZK-038 Mode D'emploi page 3

1.0 Introduction
1.1 Kit Contents
ALL kit contents must be installed.
•
(1) 40" plenum kit: KZK-038
•
(1) plenum discharge trim: KZK-038DT
•
(2) plenum support brackets
•
(8) 6" collars - (4) to attach to the bottom of the plenum;
(4) to attach to the unit where the cover plates are re-
moved.
Figure 1.1 - #KZK-038
KZK-038
•
(1) KZK-410-6 (sold separately) is used for a 10' vent run. If
you are mounting the plenum above the fireplace 10' (3m)
or less, use (1) KZK-410-6 kit.
•
KZK-CPL6 (sold separately) is (6) 6" couplers that connect
(2) KZK-410-6. You will only need (4) 6" couplers for installa-
tion. If you are mounting the plenum above the fireplace
between 10' to 20', you will need (2) KZK-410-6 kit and (1)
#KZK-CPL6 coupler kit.
Figure 1.2 - #KZK-410-6
3 Rev. 2 — May 2023