Kozy Heat Fireplaces Komfort Zone KZK-038 Mode D'emploi page 16

3.2.2 Combustible Wall Finish Requirements
•
Figure 3.6 shows installation of combustible wall finish up to 1" thick for the Bellingham 38. This combustible material
goes on top of any required non-combustible materials as required in Figure 3.3 on page 13.
•
This 1" (25mm) combustible material is able to go down to the fireplace finishing edge.
•
See Figure 3.5 on page 15 for up to 1" (25mm) thick combustible material installation around the KZK air discharge
grille.
Figure 3.6 - Bellingham 38 Combustible Wall Finish and Surround
KZK-038
Bellingham 38
16 Rev. 2 — May 2023