Publicité
Å
ı
IGNITION SYSTEM
EC622001
SPARK GAP TEST
1. Disconnect the spark plug cap from spark
plug.
2. Connect the dynamic spark tester 1
(ignition checker 2) as shown.
G
G
Å For USA and CDN
ı Except for USA and CDN
3. Kick the kick starter.
4. Check the ignition spark gap.
5. Start engine, and increase spark gap until
misfire occurs. (for USA and CDN only)
EC624000
COUPLERS AND LEADS CONNECTION
INSPECTION
1. Check:
G
MAIN SWITCH INSPECTION
3
1
(TT-R125E/TT-R125LWE)
1. Inspect:
R B/W
G
Br B
2
4
Tester (+) → Red lead 1
Tester (–) → Brown lead 2
Tester (+) →
Tester (–) → Black lead 4
Incorrect continuity → Replace.
6 - 4
ELEC
Spark plug cap 3
Spark plug 4
Minimum spark gap:
6.0 mm (0.24 in)
Couplers and leads connection
Rust/dust/looseness/short-circuit →
Repair or replace.
Main switch continuity
Check for continuity as follows:
Black/White lead 3
R
Br
B/W
3
1
2
ON
OFF
–
+
Continuous
Continuous
Tester selec-
B
tor position
4
Ω × 1
Publicité
