Horizon Fitness TR5.0 Manuel Du Propriétaire page 11

TOOLS INCLUDED:
F
5 mm L-Wrench
F
6 mm T-Wrench
PARTS INCLUDED:
F
1 Console Assembly
F
2 Console Masts
F
1 Hardware Kit
F
1 Safety Key
F
1 Audio Adapter Cable
F
1 Bottle of Silicone Lubricant
(for 2 applications)
F
1 Power Cord
F
2 Handlebars
NEED HELP?
If you have questions or if
there are any missing parts,
contact Customer
Tech Support.
PRE ASSEMBLY
WARNING
DO NOT ATTEMPT TO LIFT THE TREADMILL! Do not move or lift
treadmill from packaging until specified to do so in the assembly
instructions. You may remove the plastic wrap from console masts.
UNPACKING
Place the treadmill carton on a level flat surface. It is recommended that you place
a protective covering on your floor. Take CAUTION when handling and transporting
this unit. Never open box when it is on its side. Once the banding straps have been
removed, do not lift or transport this unit unless it is fully assembled and in the
upright folded position, with the lock latch secure. Unpack and assemble the unit
where it will be used. The enclosed treadmill is equipped with high-pressure shocks
and may spring open if mishandled. Never grab hold of any portion of the incline
frame and attempt to lift or move the treadmill.
WARNING
FAILURE TO FOLLOW THESE INSTRUCTIONS COULD RESULT IN INJURY!
NOTE: During each assembly step, ensure that ALL nuts and bolts are in place and
partially threaded in before completely tightening any ONE bolt.
NOTE: A light application of grease may aid in the installation of hardware. Any
grease, such as lithium bike grease is recommended.
11