afriso Eurovac NV Notice Technique page 91

EN
8.2 Maintenance intervals
When
Annually
After an alarm condition Perform a function test after each alarm (see
If required
37
Maintenance
Eurovac NV
Activity
Perform a function test (see chapter "Function
test")
Check the condensate trap at the product and the
condensate traps installed in the hoses
Drain the condensate traps, if necessary
If the filter in the check valve is polluted, replace
the filter
Tightly screw the condensate trap back into the
housing
If a 9 V battery is fitted for alarm in the case of
power outage, replace the battery
Verify that the product and its environment are
clean, accessible and easy to oversee
chapter "Function test")
Replace the relay fuse F1 (T 2 A)