Publicité
Les langues disponibles
Les langues disponibles
2.2
Intended use
The product is a leak detector for vacuum systems class I as per EN 13160-1
and EN 13160-2.
This product may only be used to detect leaks in tanks which are not pres-
surised (i.e. operated under atmospheric conditions) and which are used for
the storage of liquids.
Tanks
•
Tanks made of metallic and non-metallic materials with leak protection lin-
ing with approval for construction products whose suction line leads to the
bottom of the interstitial space
•
Double-walled tanks whose suction line leads to the bottom of the intersti-
tial space
The interstitial spaces of the tanks must be resistant to the liquid and its
vapours and must not contain leak detection fluid. Installation in the manhole
of underground tanks is only permissible with the approval of the authorities.
Liquids
•
Water-polluting liquids with a flash point > 55 °C (formerly danger class
AIII), which do not become viscous and which do not release solid matter
•
AdBlue® (urea solution 32.5 %) as per DIN 70070 (ISO 22241)
The product must be resistant to the liquid and its vapours. The materials
used are: PVC, silicone, ABS, NBR, PA6, EPP, EPDM. Resistance has been
proven for the liquids listed in the list of substances in chapter "List of sub-
stances".
Any use other than the application explicitly permitted in these operating
instructions is not permitted and causes hazards.
Verify that the product is suitable for the application planned by you prior to
using the product. In doing so, take into account at least the following:
•
All directives, standards and safety regulations applicable at the installa-
tion site of the product
•
All conditions and data specified for the product
•
The conditions of the planned application
In addition, perform a risk assessment in view of the planned application,
according to an approved risk assessment method, and implement the
appropriate safety measures, based on the results of the risk assessment.
Take into account the consequences of installing or integrating the product
into a system or a plant.
Information on safety
Eurovac NV
EN
4
Publicité
