Publicité
Les langues disponibles
Les langues disponibles
seconds and you cannot push the eBike backward or
can only do so with difficulty.
The roll-away lock can be immediately deactivated by
pressing the "Increase assistance" +/bicycle lights
button (4).
The push assistance function is subject to local regu-
lations; the way it works may therefore differ from the
description above. It can also be deactivated.
ABS – Anti-lock braking system (optional)
If the eBike is equipped with a Bosch eBike ABS from
the system generation the smart system, the ABS
LED (11) lights up when the eBike system starts.
In order to be able to use the following eBike func-
tions, a smartphone with the eBike Flow app is re-
quired.
Connection to the app occurs via a Bluetooth® con-
nection.
Switch on the eBike without maneuvering it.
Begin Bluetooth® pairing by long pressing (> 3 s) the
on/off button (12). Release the on/off button (12) as
soon as the topmost bar on the battery charge indica-
tor of the eBike battery (13) indicates the pairing
process by flashing blue.
Confirm the connection request in the app.
Activity tracking
In order to record activities, it is necessary to register
and log into the eBike Flow app.
To record activities, you must consent to the storage
of your location data in the app. Without this, your ac-
tivities cannot be recorded in the app. For location
data to be recorded, you must be logged in as the
user.
eBike Lock
<eBike Lock> can be activated for all users via the
eBike Flow app. A key to unlock the eBike is saved on
the smartphone for this purpose.
Bosch eBike Systems
Establishing a smartphone connection
After moving off, the ABS internally checks its func-
tionality and the ABS LED (11) goes off.
In the event of a fault, the ABS LED (11) lights up to-
gether with the orange flashing assistance level
LED (10). You can acknowledge the fault using the
select button (5) on the Mini Remote/Mini Remote
Dropbar (1) operating unit or with the mode button
(14) on the System Controller (2) operating unit.
The flashing assistance level LED (10) goes out.
While the ABS LED (11) is lit up, the ABS is not in op-
eration.
For details on the ABS and how it works, please refer
to the ABS operating instructions.
<eBike Lock> is automatically active in the following
cases:
– When switching off the eBike via the operating unit
– When automatically switching off the eBike
The eBike is unlocked when the eBike is switched on
and the smartphone is connected with the eBike via
Bluetooth®.
<eBike Lock> is connected to your user account.
Should you lose your smartphone, you can log in via
another smartphone using the eBike Flow app, and
unlock your user account and the eBike.
Warning! If you select a setting in the app that leads
to disadvantages for the <eBike Lock> (e.g. deletion
of your eBike or user account), then you will first be
shown warning messages. Please read through
these thoroughly and adhere to the warnings that
are issued (e.g. before deleting your eBike or user
account).
In order to be able to set up the <eBike Lock>, the
following conditions must be fulfilled:
– The eBike Flow app has been installed.
– A user account has been created.
– No update is currently being carried out on the
eBike.
– The eBike is connected to the smartphone via
Bluetooth®.
English – 13
0 275 U07 3RC | (23.03.2023)
Publicité
