Télécharger Imprimer la page

Pelgrim GVW572ONY Notice D'utilisation page 30

Masquer les pouces Voir aussi pour GVW572ONY:

Publicité

Les langues disponibles

Les langues disponibles

30
2. Press the on/off button to activate the
appliance.
Make sure that the appliance is in
programme selection mode.
• If the salt indicator is on, fill the salt
container.
• If the rinse aid indicator is on, fill the
rinse aid dispenser.
3. Load the baskets.
4. Add the detergent.
5. Set and start the correct programme
for the type of load and the degree of
soil.
Using the detergent
A
B
D
30
20
1. Press the release button (B) to open
the lid (C).
2. Put the detergent, in powder or tablets,
in the compartment (A).
3. If the programme has a prewash
phase, put a small quantity of
detergent in the compartment (D).
4. Close the lid. Make sure that the
release button locks into position.
Using the multi-tablets
When you use tablets, that contain salt
and rinse aid, do not fill the salt container
and the rinse aid dispenser.
1. Adjust the water softener to the lowest
level.
2. Set the rinse aid dispenser to the
lowest position.
All manuals and user guides at all-guidesbox.com
Setting and starting a
programme
Standby mode
The standby mode decreases energy
consumption by automatically deactivating
the appliance when it is not operating.
The mode activates:
• 5 minutes after the completion of the
• After 5 minutes if the programme has
Starting a programme
1. Keep the appliance door ajar.
2. Press the on/off button to activate the
3. Press the programme button
C
4. Close the appliance door to start the
Starting a programme with
delay start
1. Set a programme.
2. Press Delay to delay the start of the
3. Close the appliance door to start the
When the countdown is completed, the
programme starts.
Opening the door while the
appliance operates
Opening the door while a programme is
running stops the appliance. It may affect
the energy consumption and the
programme duration. After closing the
door, the appliance continues from the
point of interruption.
programme.
not started.
appliance. Make sure that the
appliance is in programme selection
mode.
repeatedly until the indicator of the
programme you want to select starts
flashing.
programme.
programme of 3 hours.
• The indicator
countdown.
comes on.

Publicité

loading