Pelgrim GVW572ONY Notice D'utilisation page 27

German de‐
grees (°dH)
23 - 28
19 - 22
15 - 18
11 - 14
4 - 10
<4
1) Factory setting.
2) Do not use salt at this level.
Whether you use a standard detergent
or multi-tabs (with or without salt), set
the proper water hardness level to keep
the salt refill indicator active.
Multi-tabs containing salt are
not effective enough to soften
hard water.
How to set the water softener
level
Make sure the appliance is in user mode.
1. Wait until the indicators
off and the indicator
indicator still flashes. The
intermittent flashing of the indicator
shows the current setting.
• e.g. 5 flashes + pause + 5 flashes =
level 5.
2. Press the programme button
repeatedly to change the setting. Each
pressing of the programme button
increases the level number. After
reaching level 10, the count starts
again from level 1.
3. Press on/off to confirm the setting.
Acoustic signals
Acoustic signals sound when a
malfunction of the appliance occurs. It is
not possible to deactivate these acoustic
signals.
All manuals and user guides at all-guidesbox.com
French de‐
grees (°fH)
40 - 50 4.0 - 5.0
33 - 39 3.3 - 3.9
26 - 32 2.6 - 3.2
19 - 25 1.9 - 2.5
7 - 18 0.7 - 1.8
<7
and are
flashes. The
mmol/l Clarke de‐
grees
28 - 35
23 - 27
18 - 22
13 - 17
5 - 12
<0.7 < 5
There is also an acoustic signal that
sounds when the programme is
completed. By default this acoustic signal
is deactivated but it is possible to activate
it.
How to activate the acoustic
signal for the end of programme
Make sure the appliance is in user mode.
1. Press the programme button
immediately.
• The indicator
• The indicator
2. Wait until the indicator
are off. The indicator
• The indicator shows the current
setting:
signal off.
3. Press the programme button to
change the setting.
• indicator on = Acoustic signal
on.
4. Press on/off confirm the setting.
AirDry
AirDry improves the drying results with
less energy consumption.
Water softener
level
6
1)
5
4
3
2
2)
1
and are on.
flashes.
and
still flashes.
indicator off = Acoustic
27