Pelgrim GVW572ONY Notice D'utilisation page 28

28
During the drying phase, the
door opens automatically and
remains ajar.
CAUTION! Do not try to close
the appliance door within 2
minutes after automatic
opening. This can cause
damage to the appliance.
AirDry is automatically activated with all
programmes excluding
BEFORE FIRST USE
1. Make sure that the current level of
the water softener agrees with the
hardness of the water supply. If not,
adjust the level of the water
softener.
2. Fill the salt container.
3. Fill the rinse aid dispenser.
4. Open the water tap.
5. Start a programme to remove any
processing residuals that can still be
inside the appliance. Do not use
detergent and do not load the baskets.
After starting a programme, it may take up
to 5 minutes for the appliance to recharge
the resin in the water softener. It seems
that the appliance is not working. The
washing phase starts only after this
procedure is completed. The procedure is
repeated periodically.
All manuals and user guides at all-guidesbox.com
How to deactivate AirDry
Make sure the appliance is in user mode.
1. Press the programme button twice.
2. Wait until the indicators
3. Press the programme button to
4. Press on/off to confirm the setting.
.
The salt container
The salt is used to recharge the resin in
the water softener and to assure good
washing results in daily use.
How to fill the salt container
1. Turn the cap of the salt container
2. Put 1 litre of water in the salt container
3. Fill the salt container with 1 kg of salt
CAUTION! If children have
access to the appliance, it is
advised to deactivate AirDry as
opening the door may pose a
danger.
• The indicators
• The indicator
are off. The indicator
• The indicator shows the current
setting: off = AirDry is
deactivated.
change the setting.
• on = AirDry is activated.
CAUTION! Use rough salt
designed for dishwashers only.
Fine salt increases the risk of
corrosion.
counterclockwise and remove it.
(only for the first time).
(until it is full).
and are on.
flashes.
and
still flashes.