Basic Operations - Maxspect Celestial C35-F Mode D'emploi

Basic Operations

English
Follow the instructions below to operate and program the Celestial LED Module.
Note
The LED Module turns on automatically when power is connected, and
turns off when power is cut.
When power is resumed, the LED Module will restore to the previous saved setting
automatically, whether it was last set at Manual, Preset or Automatic Mode, and the intensity
level of all the LED channels.
The Maxspect logo will be displayed with the firmware version when power
is connected.
MAXSPECT
Switching between Manual and Automatic Mode
1. Press and hold the control dial for 2 seconds to switch between the 2 modes. The
LCD panel will display "M" and "A" accordingly.
Manual Mode:
M A:
C:
Automatic Mode:
A
A:
7
100% B:
100% D:
12: 30
100% B:
Operating Instructions
c1.1
100%
100%
100%