Maxspect Celestial C35-F Mode D'emploi page 10

Automatic Mode "A"
English
Under the Automatic mode, users can program their own photo-period profile using the On
Time, Off Time and Maximum Brightness settings of each channel.
The Channel will turn itself on at the On Time, starting from 0% brightness and slowly over a
period of 30 minutes increases and reaches the Maximum Brightness set for that channel.
Then it'll start to decrease brightness starting at the Off Time, over a period of 30 minutes
then turn itself off.
For example, the following table demonstrates how you could program the channels such that
Channel A would light up from 8:00am, reaches 80% brightness at 8:30am and remain there
until 4:30pm, then decrease until turning off at 5:00pm. Similarly, Channel B would light up
from 8:30am, reaches 60% brightness at 9:00am and remain there until 11:00pm, then
decrease until turning off at 11:30pm.
Channel A
Channel B
9
Operating Instructions
Maximum On Time
Brightness
80%
65%
Off Time
08:00 16:30
08:30 23:00