Basic Operations - Maxspect GLAIVE Mode D'emploi

Basic Operations

English
Follow the instructions below to operate and program the Glaive LED Module.
Note
The LED Module turns on automatically when power is connected, and
turns off when power is cut.
When power is resumed, the LED Module will restore to the previous saved setting
automatically, whether it was last set at Manual, Preset or Automatic Mode, and the intensity
level of all the LED channels.
There is an indicator LED light on the basic controller.
You can distinquish its operating status by looking at the indicator light.
Off
White
One of the four colors
Rotating colors
7
Operating Instructions
The fixture has been turned off.
The fixture has been turned on.
Manual Adjustment Mode.
Demonstration Mode.