Cherubini MODO RX Traduction De La Notice Originale page 30

This function allows the rolling shutter to be set at a favourite middle position. When
this middle position is memorized, you just press the stop button for 2 seconds and
automatically the motor will move the shutter to this position.
To memorize the middle position, move the rolling shutter to the desired position and
then hold the STOP button down (for about 2 sec) until the motor gives confirmation.
Tn: Already programmed remote control
If you want to delete the middle position, it can be done as described below.
To change this position, it's also necessary to delete first the memorized middle position.
Before deleting it's necessary to drive the motor to the middle position (by pressing button
B for 2 seconds), then press again button B (stop) for about 4 seconds until the motor
confirms the operation by a longer movement.
Tn: Already programmed remote control
B
Tn (2 sec)
SETTING A MIDDLE POSITION
B
Tn (4 sec)
DELETING THE MIDDLE POSITION
B
Tn (4 sec)
30