ELECTRIC WIRING TO MOTOR COMMAND FOR UP-DOWN MODE
To connect the switch, use only kind of switches with mechanical or electrical interlock, to
prevent to press both buttons at same time.
The motor automatically recognizes the switch-type (with 1 or 2 buttons) and sets the
proper operational mode.
From white wire it's possible to control the motor in the middle position:
press UP long (> 2 s):
or use the short UP sequence (< 0,5 s) - short DOWN (< 0,5 s)
UP
press briefly
< 0,5 sec
(2 independent UP-DOWN buttons)
Switch with mechanical
or electrical interlocking
UP
< 0,5 sec
release
DOWN
.....
press briefly
< 0,5 sec
35
1 - BROWN
2 - WHITE
3 - BLUE
4 - YELLOW-GREEN
DOWN
release