ST MP 500 Li 48 Manuel D'utilisation page 127

be performed. Using a power tool for
operations different to those specified
may cause hazardous situations.
5) Use and precautions to take during
use of battery-operated power tools
a) Recharge only with the charger
specified by the manufacturer. A
charger that is suitable for one type of
battery pack may create a risk of fire when
used with another type of battery pack.
b) Use power tools only with
specifically designated battery
packs. Use of other battery packs
may create a risk of injury or fire.
c) When battery pack is not in use,
keep it away from other metal
objects, like paper clips, coins,
keys, nails, screws or other small
metal objects, that canmake a
connection from one terminal to
another. Shorting the battery terminals
together may cause burns or a fire.
d) Under abusive conditions, liquid may
leak from the battery: avoid all contact.
If contact accidentally occurs, flush
with water immediately. If the liquid
comes into contact with the eyes,
seek medical assistance immediately.
Liquids leaking from the battery terminals
may cause irritation or burns.
6) Service
a) Have your power tool serviced by
a qualified repair person using
only original replacement parts.
This will ensure that the safety of
the power tool is maintained.
2.2 SPECIFIC SAFETY RULES
FOR CHAINSAWS AND
ELECTRIC CHAINSAWS.
• Keep all body parts at a distance
from the toothed chain when the
chainsaw is running. Before starting
the chainsaw, check that the toothed
chain is not in contact with anything.
Lack of concentration when using the
chainsaw can cause clothes or body parts
to get caught up in the toothed chain.
• The right hand must always hold the
rear grip and the left hand the front grip.
You should never turn your hands when
holding the chainsaw, as this increases
the risk of accidents on yourself.
• Hold the power tool by insulated
gripping surfaces only, because the
toothed chain may come in contact with
hidden wiring. Toothed chain contacting
a "live" wire may make exposed metal
parts of the power tool "live" and could
give the operator an electric shock.
• Always wear safety goggles and ear
protection. Other protective equipment
for the head, hands and feet is also
recommended. The wearing of protective
clothing will reduce accidents caused
by hurled workpieces and accidental
contact with the toothed chain.
• Do not use chainsaws when positioned
on a tree. Starting a chainsaw when
positioned on a tree can cause body injuries.
• Keep proper footing and balance at all
times, and only use the chainsaw on
fixed, secure and flat surfaces. Slippery or
unstable surfaces such as ladders, can cause
loss of balance or control of the chainsaw.
• When cutting a branch that is under
tension, be alert for spring back. When
the tension of the wood fibres is released, the
branch can spring back and injure the operator
and/or kick the chainsaw out of control.
• Use extreme caution when cutting
small size brush and saplings.
The slender material may catch in the
chainsaw and be whipped towards
you and/or pull you off balance.
• Carry the chainsaw by the front grip
when it is switched off and keep it
away from your body. When storing or
transporting a chainsaw always use
the guide bar cover. Correct handling of
the chainsaw will reduce the probability of
unintended contact with the moving chain.
• Follow the instructions concerning
lubrication, chain tension and
replacement parts. Chains with incorrect
tension and lubrication can break and
increase the risk of kickback.
• Keep handles dry, clean and free from
oil and grease. Greasy and oily handles
are slippery and can cause loss of control.
• Use the chainsaw to cut wood only. Do not
use the chainsaw for purposes for which
it is not intended. For example: do not use
an chainsaw for cutting plastic, masonry
or other non-wood materials. Using the
chainsaw for operations other than those
intended could result in a hazardous situation.
• Local regulations may restrict
the age of the operator.
• Prolonged exposure to vibrations can
cause injuries and neurovascular disorders
(also called "Raynaud's syndrome" or "white
finger"), especially to people suffering from
circulation disorders. The symptoms can
appear in the hands, wrists and fingers
and are shown through loss of sensitivity,
EN - 3