Frigelux RFDP246RCA++ Manuel D'utilisation page 34

 The appliance should be located in the coolest area of the room, away from heat
producing appliances or heating ducts, and out of the direct sunlight.
 Let hot foods cool to room temperature before placing them inside. An overload
will force the compressor to run longer. Food that freezes too slowly may lose
quality, or deteriorate.
 Be sure to wrap foods properly, and wipe containers dry before placing them in
the appliance. This cuts down on frost build-up inside.
 Storage bin should not be lined with aluminum foil, wax paper, or paper toweling.
Liners interfere with cold air circulation, making the appliance less efficient.
 Organize and label food to reduce door openings and extended searches.
Remove as many items as needed at one time, and close the door as soon as
possible.
This refrigeration appliance has been designed by the manufacturer in such a way as
to guarantee the most efficient use of energy. If you change to current drawers, baskets
and shelves combination you may impact the energy consumption
Changing the light bulb
Light bulb data: 220-240 V, max. 10 W
To switch off the appliance, set the temperature regulator to position "OFF".
 Unplug the mains plug.
 To change the light bulb, undo the screw.
 Press the light bulb cover as shown and slide it backwards.
 Change the defective light bulb.
 Refit the light bulb cover and the screw.
 Put the refrigerator back into operation.
Turn off your appliance
 If the unit is not likely to operate for a long period of time:
 Remove all food from your appliance from the refrigerator.
 Switch off the appliance by setting the thermostat to position "OFF".
 Unplug the appliance.
 Clean it thoroughly.
 Keep the door open to prevent odors from rising.
34