Frigelux RFDP246RCA++ Manuel D'utilisation page 27

4. USE INSTRUCTIONS
Temperature setting:
Your refrigerator has one control for regulating the temperature. The temperature
control is located at the top of the fridge.
The first time you put your appliance into operation, set the thermostat between "3 and
4" and let it run empty for 4 hours before storing food for it to cool sufficiently.
The range of the temperature control is from position "1" the warmest to "7" the coldest.
Adjust the temperature control to the setting that best suits your needs. The setting
between "3 and 4" should be appropriate for home or office refrigerator use.
To turn the refrigerator off, turn the temperature control to "0".
Appliance thermostat has 8 settings. The appliance assures that temperature is
maintained as long as it is in operation and that it is used in normal conditions of use.
The temperature inside the appliance can be influenced by many factors : ambient
temperature, sun exposure, number of door opening and amount of food stored...
The slight changes in temperature are perfectly normal.
Settings 1 to 2: Refrigerator compartment average temperature 8 to 11 °C
Freezer compartment average temperature ≤-14°C
Settings 3 to 4 : Refrigerator compartment average temperature 6 to 10 °C
Freezer compartment average temperature ≤-16°C
Settings 5 to 7 : Refrigerator compartment average temperature ≤4 °C
Freezer compartment average temperature ≤-20°C
NOTE:
 Turning the temperature control to "0" position stops the cooling cycle but does
not shut off the power to the refrigerator.
 If the unit is unplugged, lost power, or turned off; you must wait 3 to 5 minutes
before
 Restarting the unit. If you attempt to restart before this time delay, the
refrigerator will not start.
27