Teac VRDS-701T Mode D'emploi page 11

Automatic power saving function
This unit has an automatic power saving function (page 22).
By default, the setting is ON.
EN
The unit will automatically enter standby mode if no audio is output
and no operation is conducted for about 30 minutes.
Set the automatic power saving function to OFF to disable it
(page 22).
Display brightness
You can adjust the brightness of the unit's display (page 21).
By default, the setting is Slightly BRIGHT (Stays lit dimly).
When set to AUTO OFF (automatic illumination off ), the display
turns off when not being operated.
o NO DISC and other warnings will stay lit.
11